I am looking for a router, and OpenWRT came up. I was looking at their table of hardware and the ASUS RT-AC3100 seemed like a good option, as its cheap used, (~$40 USD) and supported by the latest OpenWRT version.
Thing is, its EOL, per Asus. Does this mean that it won’t be supported on OpenWRT for much longer?
Is there a way to see or estimate when a router will no longer work on OpenWRT?
Looking up the router, it was allegedly produced in 2024, according to the OpenWRT wiki. Barring any outliers, OpenWRT generally only sunsets hardware when a new version has higher hardware requirements than is provided by a device. The supported devices page lists out the hard requirements as well as recommendations. Currently 8 MiB flash storage is the minimum, with 16+ MiB recommended (for additional functions, user addons, etc.). 64 MiB is the minimum RAM target, with 128+ MiB recommended. According to the router’s wiki page, your chosen router exceeds both recommended requirements. Overall, the router should be suitable for a good while not barring any severe hardware or bootloader-level exploitable vulnerabilities are discovered with the device. There is no explicit date of when your router will no longer be supported, but you can check the history of the supported devices page to get the general trend of when OpenWRT bumps up the minimum requirements. For instance, it was just 4/8+ MiB flash storage and 32/64+ MiB RAM in early 2017.
Depending on what you want to do with the router, getting something with more RAM and a stronger CPU could be beneficial for various tasks (e.g. adblock-fast, cake sqm, etc.). Definitely do research on what you want your router to do though before choosing to go with higher specs or not.
FWIW I bought an N100 mini pc with 2 nics for ~100eur and use it as an openwrt router. It’s so easy and simple IDK why more people don’t recommend it.
How is x86 openwrt? I’ve been on opnsense but my APs are openwrt and maybe I’m remembering wrong after a long time of not touching the management page but I could have sworn it used to detail what rate cables connect at and it doesn’t seem to any more without unrememberable shell commands, and at some point my lan domains stopped working, among other minor annoyances I could also swear are new since my absence.
Pretty much the same as any other incarnation of openwrt, just without a lot of the compatibility headaches and weird installation processes that you typically have with other architectures. It’s just install and forget pretty much.
As for the link speed, you can just
cat /sys/class/net/eth*/speedas with any other linux system. Not sure how your configurations stopped working or broke, maybe your storage got corrupted or something? Hard to tell, but I doubt openwrt caused it on its own, it sounds new to me.